by admin | May 24, 2022 | Fluid Automation Valves, Solenoid Coils
Solenoid Coils Solenoid coils are a popular electrical component that generates an electromagnetic field by tightly wrapping a wire around a core, usually made of metal. The electromagnetic field formed when an electrical current is fed through the coil provides...
by admin | May 23, 2022 | Hydraulics, Hydraulic Valves
Ball Valve Some ball valves can be equipped with an electronic or pneumatic actuator instead of a manual handle to turn the valve on or off. They have a direct connection to the valve stem and can turn it a quarter turn. The ISO 5211 standard is the most frequent...
by admin | May 23, 2022 | Fluid Automation Valves, Butterfly Valve
Butterfly Valve Butterfly valve are part of the quarter-turn valve family and function similarly to ball valves. A disc is linked to a rod as the “butterfly.” When the rod turns the disc a quarter turn perpendicular to the flow direction, it shuts. The...
by admin | May 23, 2022 | Hydraulic Valves, Angle Seat Valve
Angle Seat Valve with Steel Operator Angle seat valves are pneumatically operated piston valves that operate in two directions. The piston actuator lifts the seal off its seat in a linear motion. The flow is barely obstructed in the open position due to the tilt of...
by admin | May 23, 2022 | Hydraulics, Hydraulic Valves
Angle Seat Valve with Plastic Operator Angle seat valves are pneumatically operated piston valves that operate in two directions. The piston actuator lifts the seal off its seat in a linear motion. The flow is barely obstructed in the open position due to the tilt of...
by admin | May 21, 2022 | Fluid Automation Valves, Solenoid Valves
Pulse Jet Dust Collector Solenoid Valve A pulse jet dust collector valve gathers dust particles onto filters in a dust collecting chamber while in operation. Dust collects in cakes that become thick and dense, obstructing airflow through the filters and lowering the...
by admin | May 9, 2022 | Hydraulics, Hydraulic Valves
Pneumatic Tools Pneumatic tools are compressed air driven power tools powered by an air compressor, or tools powered by portable compressed carbon dioxide cylinders. A pneumatic tool can operate indefinitely as long as the attached air compressor can continuously...
by admin | May 9, 2022 | Hydraulics, Hydraulic Valves
Other Instrumentations A pressure gauge snubber is a device used to suppress (“snub”) excess force or rapid movement in mechanical systems. Pressure snubbers are designed to dampen the effect of pressure pulses and spikes to assure longer service life and readability...
by admin | May 9, 2022 | Hydraulics, Hydraulic Valves
Needle Valves Needle valves, sometimes referred to as plunger valves, are regulating valves and enable engineers to finely control and regulate water flow and pressure. The precision is achieved through the fine movement of the shaft, which enables the gearbox to move...
by admin | May 7, 2022 | Ball Valve, Instrumentation
Ball Valves There are five general body styles of ball valves: single body, three-piece body, split body, top entry, and welded. The difference is based on how the pieces of the valve—especially the casing that contains the ball itself—are manufactured and assembled....
Recent Comments